STEICOtimberfloc

Air-injected insulation from wood fibres and cellulose

Innovative combi-air-injected insulation with the advantages of wood fibres and cellulose

Insulates cavities of all shapes and sizes - free of joints and waste
Particularly cost-effective due to optimised material requirements (insulation with low raw densities due to three-dimensional interlocking of the wood fibres)
Quick and easy processing with the most common air-injection machines thanks to the cellulose content
Independent product monitoring by the German Materials Testing Institute of North Rhine-Westphalia
Wood fibre from sustainable forestry, PEFC-certified
Optimised resource efficiency thanks to the use of cellulose fibres from cardboard

Technical Specifications Dimensions

Additional documents

Application area

Air injected insulation material for closed and open cavities of roofs, walls, and ceilings

Technical Specifications

European technical approval (ETA)	23/0465
Fire class (RTF) according to EN 13501-1	E
Declared thermal conductivity	0,039 W/(m*K)
Flow resistance r according to DIN EN 290 [(kPa*s)/m²]	(kPa*s)/m²
Density	Open blown: attic floor: approx. 32 / Closed cavities: roof, ceiling, wall: approx. 42 - 60 kg/m³
Water vapour diffusion resistance factor µ	2/3
Specific heat capacity	2.100 J/(kg*K)
Declared level of airflow resistance	(≥45kg/m³)= 8; ( (kPa*s)/m²
Ingredients	Wood fibres, cellulose, fire retardants

Dimensions

Number/pal. [pcs.]	Weight/pcs. [kg]	Weight./pal. (approx.) [kg]
21	15,0	335

Weight and Packaging

Number/pal. [pcs.]	Weight/pcs. [kg]	Weight./pal. (approx.) [kg]	pac./pal. wood (approx) [kg]	pac./pal. plastic (approx) [kg]	pac./pal. paper/cardboard (approx) [kg]
21	15,0	335	12,6	4,0	0,04

Notes

Storage

Store in a dry and UV-protected place
Do not remove the transport packaging until the pallet is on a firm, level surface.
Store pallets without additional load

Disposal

EWC 17 06 04 (unmixed insulation material) / 17 09 04 (mixed construction and demolition waste)

Installation

The air injected isolation is installed exclusively by trained partners and licensed companies (in accordance with European Technical Approval).
The insulation material is applied using specialised air-injection blowing machines

Occupational health and safety

Building moisture

Excess moisture caused by e.g. fresh screed, plaster, or paint must be removed by ventilation.
Dry air must be provided inside the building during the construction phase.

Declaration of performance

Certificates quality management

Caption

other abbreviations

pal. Pallet

T&G Tongue and Groove

pac. Packaging

approx. Approximately

SE square edge

Pcs. Pieces