STEICOmulti tape P
High performance tape with kraft paper
High performance tape with kraft paper for internal use
- Solvent-free
- Temperature resistant between -40° and +100°
- Can be torn by hand
- Sturdy cardboard carrier
- Patches ideal for sealing injection holes
Technical data sheet
Characteristics
| Temperature resistance [°C] | -40 / +100 |
| Processing temperature [°C] | +5 |
| Adhesive | Acrylic dispersion, solvent-free |
| Adhesive backing | Kraft paper with PE protective coating |
| Colour | White |
| Thickness (without release paper) [mm] (approx.) | 0,3 |
| Temperature range [°C] | -40 to +100 |
| Peeling strength | fulfilled according to DIN 4108/11 |
| Peel strength after ageing | fulfilled according to DIN 4108/11 |
Dimensions
| Article number | Length [mm] |
Width [mm] |
Plaster [mm] | Number/roll [plaster] | Number/pack. [pcs.] |
|---|---|---|---|---|---|
| 358211 | 40000 | 60 | - | - | 10 |
| 358212 | 40000 | 200 | 180*180 | 222 | 1 |
Processing STEICOmulti tape P in the STEICO sheet and membrane system
- Substrates must be capable of bearing a load, dry and free from dust and grease
- Align the STEICOmulti tape P centrally, gradually remove the release liner and forcefully rub on the adhesive tape
- Adhere the STEICOmulti tape P without tension and creases. The substrate must be additionally mechanically secured if tensile forces arise
- Applying additional pressure by means of a press-on roller is recommended to improve the adhesion, in particular, on wood-baded panels
- Adhesive bondings may not be located in stagnant water. Adhesive bondings are also not permitted in sauna and swimming pool construction
(Please refer to the product data sheet for detailed information)
Similar Products
