STEICOmulti CAP clear
Self-adhesive weather protection membrane
- Fully self-adhesive, reliably protects components from rain, outdoor exposure of up to 3 months possible
- High level of safety for installers thanks to anti-slip surface and transparent membrane (allows view of the substrate)
- Moisture variable - sd value of 0.3-2.7 m
- High adhesive strength thanks to double functional film
Technical data sheet
Characteristics
| Production and designation | EN 13984 |
| Fire class (RTF) according to EN 13501-1 | E |
| Area weight [g/cm²] | 215 g |
| Temperature resistance | -40 / +70 °C |
| Processing temperature | > -10, the surface must be dry and free of ice °C |
| Max. tensile force longitudinal | ≥ 200 N/5 cm |
| Max. tensile force transverse | ≥ 200 N/5 cm |
| Elongation at Max. tensile force longitudinal | ≥ 30 % |
| Elongation at Max. tensile force transverse | ≥ 30 % |
| Tear resistance longitudinal | ≥ 50 N |
| Tear resistance transverse | ≥ 50 N |
| Resistance to water penetration | W1 |
| Split silicone liner | 125/25 cm |
| Outdoor exposure | 12 Wochen |
| Adhesive | Modified acrylate, solvent-free |
Dimensions
| Article number | Length [mm] |
Width [mm] |
Area/roll [m²] | Coverage/pal. net [m²] | Number/pal. [pcs.] |
|---|---|---|---|---|---|
| 424483 | 50000 | 1500 | 75 | 1800,000 | 24 |
Processing STEICOmulti CAPclear
- Substrates must be capable of bearing a load, dry and free from dust and grease
- Lay the membrane so that the printed side is facing the fitter
- STEICOmulti CAP has to be applied on the whole surface of the substrate (timber, wood-based material, masonry, concrete). It can be applied
horizontally or vertically. They need to have an overlap of at least 10 cm.
- Cut the membrane to required length, gradually remove the liner and adhere STEICOmulti CAP progressively at the beginning of the element.
- Align STEICOmulti CAP and gradually remove the liner and forcefully rub on the membrane
- Split release liner facilitates the bonding of corners, as initially only one liner can be removed
- Component joints and penetrations must be made in an airtight manner using STEICO system accessories
- Avoid standing water. Heavy rains should be evacuated from the building through drains.
- Process STEICOmulti CAP in span direction of the ceiling element.
- Local norms and regulations have to be observed.
(Please refer to the product data sheet for detailed information)
Declaration of performance
