STEICOmulti renova

Moisture variable vapour control membrane

Moisture variable vapour control membrane for indoor applications

  • Optimised for demanding projects in terms of building physics - moisture variable with more than 80-fold spread
  • High tear resistance
  • Robust and flexible: 3-layer, coated PP nonwoven fabric, mesh reinforced
  • Suitable for combination with air-injected insulation and batt insulation materials
Application area
  • For airtight use on the inside of roof, wall and ceiling constructions
  • Can be used with moisture-critical structures (appropriate inspection of the structure recommended)
  • Suitable for sub and top installation when sufficient insulation covering is provided by STEICO wood fibre sarking boards
  • Suitable for air-injected insulation and batt insulation materials

Technical Specifications

Production and designation EN 13984: 2013
Fire class (RTF) according to EN 13501-1 E
Area weight [g/cm²] 100 g
Temperature resistance -40 / +80 °C
UV protection in non-installed state 3 months
Max. tensile force longitudinal ≥ 300 N/5 cm
Max. tensile force transverse ≥ 260 N/5 cm
Elongation at Max. tensile force longitudinal ≥ 20 %
Elongation at Max. tensile force transverse ≥ 18 %
Tear resistance longitudinal ≥ 230 N
Tear resistance transverse ≥ 230 N

Dimensions

Rolled product

Length [mm]

Width [mm]

Number/pal. [pcs.]

Area/roll [m²]
50000 1500 20 75
50000 1500 20 75
50000 3000 20 150
50000 3000 20 150
Notes

Storage

  • Store in a dry place, protected from dirt, sun and moisture

Disposal

  • dispose with normal construction waste, observe applicable legal guidelines

Installation

  • The airtight membrane can be cut to size using a sharp knife or a cutting tool suitable for membranes

Building moisture

  • Remove increased indoor humidity (e.g. during the construction phase) by consistent and constant ventilation.
  • Occasional shock ventilation is not sufficient to quickly remove large amounts of building-related moisture from the building,
  • Set up a building dryer if necessary.
  • A maximum relative humidity of 70 % during the construction period must be maintained.
  • To avoid condensation, the airtight bonding of the STEICOmulti renova should be carried out immediately after installation of the thermal insulation. This applies in particular to work in winter.

Declaration of performance

Certificates quality management

Caption
other abbreviations

pal. Pallet

T&G Tongue and Groove

pac. Packaging

approx. Approximately

SE square edge

Pcs. Pieces