STEICO Plugs
Sealing plugs for holes in wood fibre insulation boards
Secure closure of holes in wood fibre boards
- For sealing of holes for fasteners or air-injection insulation
- Conically shaped tooth profile for easy fitting and secure hold
- Easy to fit by hand or with a rubber hammer – no adhesive or primer required
- Suitable for STEICO ETICS (External Thermal Insulation Compound System), can be directly plastered over, no visible signs of the plugs in the rendering
- Water-repellent, immediate protection against the weather thanks to complete hydrophobisation
- Wood from responsible forestry - PEFC certified
Technical data sheet pdf
Technical Specifications
| Produced and supervised according to | EN 13171 |
| Board designation | WF – EN 13171 – T5 – DS(70/-)2 – CS(10\Y)180 – TR25 – WS1,0 – MU3 |
| Fire class (RTF) according to EN 13501-1 | E |
| Declared thermal conductivity | 0,045 W/(m*K) |
| Declared thermal resistance [(m²*K)/W] | 0,75 (m²*K)/W |
| Density | 210 kg/m³ |
| Water vapour diffusion resistance factor µ | 3,00 |
| Short-term water absorption | ≤1,0 kg/m² |
| Specific heat capacity | 2.100 J/(kg*K) |
| Compression strength | ≥ 180 kPa |
| Tensile strength perpendicular to face | ≥ 25 kPa |
| Declared level of airflow resistance | ≥100 (kPa*s)/m² |
| Ingredients | wood fibre, polyurethane resin, paraffin wax |
Dimensions
Thickness [mm] |
Diameter [mm] | Edge profile | Number/pal. [pcs.] |
Number/pack. [pcs.] |
|---|---|---|---|---|
| 35 | 50 | Conical gear rim profile | 4800 | 100 |
| 35 | 68 | Conical gear rim profile | 4400 | 100 |
| 35 | 105 | Conical gear rim profile | 2640 | 60 |
| 35 | 120 | Conical gear rim profile | 2200 | 50 |
Weight and Packaging
Thickness [mm] |
Diameter [mm] | Edge profile | Weight/m² [kg] |
Weight/pack. [kg] | Packaging/pack. Paper/cardboard (approx.) [kg] |
|---|---|---|---|---|---|
| 35 | 50 | Conical gear rim profile | 0,04 | 4,00 | 0,40 |
| 35 | 68 | Conical gear rim profile | 0,04 | 4,00 | 0,40 |
| 35 | 105 | Conical gear rim profile | 0,07 | 4,00 | 0,40 |
| 35 | 120 | Conical gear rim profile | 0,09 | 4,00 | 0,40 |
Notes
Storage
- Protect from damage
- Store in a dry place
- Only remove packaging when the ambient climate is dry
Disposal
Waste cuttings:
- Waste code according to 2014/955/EU: 03 01 05
Dismantling:
- Waste code according to 2014/955/EU: 17 02 01
Occupational health and safety
- HSE guidance on the safe cutting of timber and the management of wood dust should be followed
Building moisture
- Dry air must be ensured inside the building during the construction phase.
- In the event of prolonged damp weathering with driving rain, or in periods of very high humidity, the material moisture content of the wood fibre insulation boards that have not yet been plastered increase significantly. Before plastering, a limit moisture content of the wood fibre insulation board of 13 % must be maintained.
Caption
other abbreviations
pal. Pallet
T&G Tongue and Groove
pac. Packaging
approx. Approximately