STEICOmulti tape P
High performance tape with kraft paper
- Solvent-free
- Temperature resistant between -40 and + 100 °C
- Can be torn by hand
- Sturdy cardboard carrier
- Stickers ideal for sealing injection holes
Product sheet
Characteristics
| Temperature resistance [°C] | -40 to +100 |
| Processing temperature [°C] | +5 |
| Adhesive | Acrylic dispersion, solvent-free |
| Adhesive backing | Kraft paper with PE protective coating |
| Colour | White |
| Thickness (without covering) [mm] | approx. 0,3 |
| Temperature range [°C] | -40 to +100 |
| Peeling strength | fulfilled according to DIN 4108/11 |
| Peel strength after aging | fulfilled according to DIN 4108/11 |
Dimensions
Length [mm] |
Width [mm] |
Plaster [mm] | Number/roll [plaster] | Number/pack. [pcs.] |
|---|---|---|---|---|
| 40000 | 200 | 180*180 | 222 | 1 |
| 40000 | 60 | - | - | 10 |
Processing STEICOmulti tape P in the STEICO sheet and membrane system
- Substrates must be capable of bearing a load, dry and free from dust and grease
- Align the STEICOmulti tape P centrally, gradually remove the release liner and forcefully rub on the adhesive tape
- Adhere the STEICOmulti tape P without tension and creases. The substrate must be additionally mechanically secured if tensile forces arise
- Applying additional pressure by means of a press-on roller is recommended to improve the adhesion, in particular, on wood-baded panels
- Adhesive bondings may not be located in stagnant water. Adhesive bondings are also not permitted in sauna and swimming pool construction
(Please refer to the product data sheet for detailed information)