STEICOmulti UDB
Highly vapour-permeable airtight membrane
Highly vapour-permable airtight membrane, sarking membrane and roofing underlayment
- 3-layer, tear-resistant and flexible
- 2 integrated self-adhesive areas
- Airtight, highly vapour-permeable and resistant to driving rain
- Outdoor exposure of up to 3 months possible
Product sheet
Characteristics
| Production and designation | EN 13859 |
| Fire class (RTF) according to EN 13501-1 | E |
| Area weight [g/cm²] | 165 |
| sd value [m] | 0,02 |
| Temperature resistance [°C] | -40 to +80 |
| Max. tensile force longitudinal | 290 |
| Max. tensile force transverse | 210 |
| Elongation at Max. tensile force longitudinal [%] | 50 |
| Elongation at Max. tensile force transverse [%] | 90 |
| Tear resistance longitudinal [N] | 220 |
| Tear resistance transverse [N] | 280 |
| Resistance to water penetration | W1 |
| Seepage resistance after artificial ageing | W1 |
| Outdoor exposure | 3 Months |
| Suitable as a temporary roof cover | 4 Weeks |
| Resistance to air penetration [m³/m²] | ≤0,04×h according to EN 12114 |
| Minimum roof pitch [°] | ≥10 ° depending on the standard roof pitch of the roofing |
Dimensions
Length [mm] |
Width [mm] |
Area/roll [m²] | Area/pal. Nett [m²] | Number/pal. [pcs.] |
|---|---|---|---|---|
| 50000 | 1500 | 75 | 1500,000 | 20 |
Processing STEICOmulti UDB
- Lay the membrane or sheet so that the printed side is facing the fitter
- Lay the membrane or sheet parallel to the eaves starting with an overlap of at least 10 cm
- Fix the membrane or sheet in place solely within the overlap area (e.g. clips)
- Activate the longitudinal self-adhesive areas by removing the protective strip only after the membrane or sheet has beed fixed in place
The following also applies when used as an airtight membrane:
- Ensure flush-mounted bay insulation (no cavities may exist under the STEICOmulti UDB)
- Sufficiently thick insulation covering with STEICOspecial/STEICOspecial dry and STEICOuniversal/STEICOuniversal dry must be carried out; for additional details see "Konstruktionsheft Steildach" (inclined roof construction booklet)
- Component joints and penetrations must be made in an airtight manner by means of STEICO system accessories
- Additional information can be found in the seperate processing instructions for STEICOmulti UDB
(Please refer to the product data sheet for detailed information)
Declaration of performance
System Recommendations
Similar Products
STEICOmulti CAP
