STEICOmulti tape P

High performance tape with kraft paper

  • Solvent-free
  • Temperature resistant between -40 and + 100 °C
  • Can be torn by hand
  • Sturdy cardboard carrier
  • Patches ideal for sealing injection holes

Product sheet

Characteristics

Temperature resistance [°C] -40 to +100
Processing temperature [°C] +5
Adhesive Acrylic dispersion, solvent-free
Adhesive backing Kraft paper with PE protective coating
Colour White
Thickness (without release paer) [mm] approx. 0,3
Temperature range [°C] -40 to +100
Peeling strength fulfilled according to DIN 4108/11
Peel strength after ageing fulfilled according to DIN 4108/11

Dimensions

Length [mm]

Width [mm]

Plaster [mm] Number/roll [plaster]

Number/pack. [pcs.]

40000 200 180*180 222 1
40000 60 - - 10

Processing STEICOmulti tape P in the STEICO sheet and membrane system

  • Substrates must be capable of bearing a load, dry and free from dust and grease
  • Align the STEICOmulti tape P centrally, gradually remove the release liner and forcefully rub on the adhesive tape
  • Adhere the STEICOmulti tape P without tension and creases. The substrate must be additionally mechanically secured if tensile forces arise
  • Applying additional pressure by means of a press-on roller is recommended to improve the adhesion, in particular, on wood-baded panels
  • Adhesive bondings may not be located in stagnant water. Adhesive bondings are also not permitted in sauna and swimming pool construction

(Please refer to the product data sheet for detailed information)

Similar Products

STEICOmulti tape F

High performance tape with special foil
To Product

STEICOmulti primer

solvent free primer
To Product

STEICOmulti connect

solvent free primer
To Product

STEICOmulti fill

Permanantly flexible ETICS joint adhesive
To Product

STEICOmulti nail

Nail tight tape
To Product

STEICO Plugs

Secure closure of holes in wood fibre boards
To Product